Spy Hunter II (rev 1)
Driving/shooting game using a 3-D perspective from behind and above the car. The car can attain several different weapons up to four at one time. Two players may play at the same time cooperatively.
Spy Hunter II (rev 1)
Télécharger Spy Hunter II (rev 1)
Contents of the ROM :
Technical
CPU
- maincpu 68000 (@ 7 Mhz)
- sg:cpu 68000 (@ 8 Mhz)
- tcs:cpu M6809E (@ 8 Mhz)
Chipset
- Midway Sounds Good Sound Board
- DAC
- Midway Turbo Chip Squeak Sound
- DAC
Display
- Orientation Yoko
- Resolution 255 x 255
- Frequency 30 Hz
Controlers
- Number of players 2
- Number of buttons 7
- Kind of controler
- paddle
- paddle
Spy Hunter II (rev 1) Screenshots
Clones of Spy Hunter II (rev 1)
If you liked Spy Hunter II (rev 1)
You might Like:
- 005
- Agent Super Bond (Super Cobra conversion)
- Avenging Spirit
- Beraboh Man (Japan version C)
- Bonanza Bros (US, Floppy DS3-5000-07d? Based)
- Brodjaga (Arcade bootleg of ZX Spectrum 'Inspector Gadget and the Circus of Fear')
- Cloak & Dagger (rev 5)
- Flashgal (set 1)
- Intrepid (set 1)
- Momoko 120%
- Pipi & Bibis / Whoopee!! (Z80 sound cpu, set 1)
- Spy Hunter
- Top Secret (Japan, old revision)
- Wonder Momo
- Zarya Vostoka
Spy Hunter II (rev 1) and M.A.M.E.
0.37b1 [?]
0.36b6 [Aaron Giles]
0.33b4 [Bryan McPhail]
Artwork available
WIP:
- 0.147u2: hap changed description to 'Spy Hunter II (rev 2)' and clone to 'Spy Hunter II (rev 1)'. Note: Spy Hunter 2 (description) is actually a PS2 game.
- 0.145u7: Added 'Midway Sounds Good Sound Board' and 'Midway Turbo Chip Squeak Sound Board' sound.
- 0.133u1: Renamed (spyhnt2a) to (spyhunt2a).
- 0.129u6: Changed 68000 CPU3 to CPU2.
- 13th October 2008: Mr. Do - Way back when, Kiltron re-created a bezel for Spy Hunter 2. I, however, could not figure out a good way to split the screen between the two halves of the bezel. I figured out a way that somewhat worked, and it came out OK, I think (not that SH2 is a good game in the first place).
- 0.122u6: Replaced M6809 CPU2 with M6809E (8MHz).
- 0.98u1: Changed M6809 CPU2 clock speed to 2MHz.
- 0.37b1: Added Spy Hunter 2 (rev 2). Changed 'Spy Hunter 2' to clone '(rev 1)'. Renamed (spyhunt2) to (spyhnt2a).
- 0.36b7: Changed 68000 CPU2 clock speed to 8MHz.
- 0.36b6: Aaron Giles added Spy Hunter 2 (Bally Midway 1987).
- 23rd September 1999: Aaron Giles sent in an MCR update with support for Power Drive, Turbo Tag, Spy Hunter 2, Blasted, Arch Rivals, Tri-Sports and Pigskin 621AD and also tons of cleanup.
- 0.33b4: Bryan McPhail added Spy Hunter 2 (Testdriver).
LEVELS: 1 (endless)
Romset: 992 kb / 14 files / 328.5 zip
0.36b6 [Aaron Giles]
0.33b4 [Bryan McPhail]
Artwork available
WIP:
- 0.147u2: hap changed description to 'Spy Hunter II (rev 2)' and clone to 'Spy Hunter II (rev 1)'. Note: Spy Hunter 2 (description) is actually a PS2 game.
- 0.145u7: Added 'Midway Sounds Good Sound Board' and 'Midway Turbo Chip Squeak Sound Board' sound.
- 0.133u1: Renamed (spyhnt2a) to (spyhunt2a).
- 0.129u6: Changed 68000 CPU3 to CPU2.
- 13th October 2008: Mr. Do - Way back when, Kiltron re-created a bezel for Spy Hunter 2. I, however, could not figure out a good way to split the screen between the two halves of the bezel. I figured out a way that somewhat worked, and it came out OK, I think (not that SH2 is a good game in the first place).
- 0.122u6: Replaced M6809 CPU2 with M6809E (8MHz).
- 0.98u1: Changed M6809 CPU2 clock speed to 2MHz.
- 0.37b1: Added Spy Hunter 2 (rev 2). Changed 'Spy Hunter 2' to clone '(rev 1)'. Renamed (spyhunt2) to (spyhnt2a).
- 0.36b7: Changed 68000 CPU2 clock speed to 8MHz.
- 0.36b6: Aaron Giles added Spy Hunter 2 (Bally Midway 1987).
- 23rd September 1999: Aaron Giles sent in an MCR update with support for Power Drive, Turbo Tag, Spy Hunter 2, Blasted, Arch Rivals, Tri-Sports and Pigskin 621AD and also tons of cleanup.
- 0.33b4: Bryan McPhail added Spy Hunter 2 (Testdriver).
LEVELS: 1 (endless)
Romset: 992 kb / 14 files / 328.5 zip
